Hup Heng (KL) Sdn. Bhd. Profile

  • COMPANY PROFILE
    COMPANY PROFILE

    Hup Heng Company, founded in 1945 and later incorporated in Malaysia as a private limited company in 1980 has been actively involved in the engineering and hardware industries specialising in fluid handling. We are a leading pump, system, design and solution provider in the market which spans from household pressure systems to agriculture irrigation systems, industrial wastewater transfer and waste water handling, swimming pools and landscape circulating pump systems, building services to township water supplies.

    With an experience of over 60 years in this field coupled with our range of reliable brand of products together with our expertise, well-trained personnel both in sales and technical support along with our reliable sub-contractors/ associates, we are in a very strong position to provide our customers the utmost solutions to their needs.

  • SOUTHERN CROSS
    SOUTHERN CROSS
    ISO SOVEREIGN END SUCTION CENTRIFUGAL PUMP

    APPLICATIONS
    Designed for efficient and reliable general purpose water transfer in industry, building services and irrigation.

    FEATURE
    • Superior hydraulic design and manufacturing methods produce significantly higher efficiencies for lower running costs and reduced maintenance
    • Australian designed and manufactured
    • 32 to 200mm discharge
    • Up to 250 litres per second discharge  and heads to 160 metres.
    • Wide range of options

    SPECIAL DESIGN FEATURES
    • Include taper mounted and keyed impeller for easy removal from shaft during servicing and positive locking during operation
    • Heavy duty shaft with large capacity impeller end bearing for safe operation at high speed
    • AS1830/T260 cast iron volute for added safetyreusable “O” ring body seal; minimum number of parts for full range (only four shaft modules) reduces spare parts stocking
    • Hydraulically and dynamically balanced impellers
    • High efficient suction performance from double curvature impeller vanes
  • MYERS HIGH PRESSURE RECIPROCATING PUMPS
    MYERS HIGH PRESSURE RECIPROCATING PUMPS
    MODEL D SERIES

    High Pressure Reciprocating
    Slow operating speed reduces wear and prolongs pump life. The fluid end is available in ductile iron or aluminum bronze with flat valves, making routine maintenance easy without removing the pump from the system. All the valve and piston assemblies are serviceable through convenient front and top openings.

    Key Features
    • Flows to 65 GPM
    • Pressure ratings up to 2,000 PSI
    • Internal gear reductions
    • Continuous splash lubrication provided either direction of rotation
  • PRICE
    PRICE
    AIR OPERATED DIAPHRAGM PUMP

    Price® (USA) Centrifugal and Air Operated Diaphragm (AOD®) pumps are  manufactured specially in addressing the needs of specialty applications for industrial and OEM users.

    Applications Of Distinction: - Case Histories
    • Latex Adhesives
    • Silicon Coating
    • Meat Processing
    • Steel Mill
    • Wallpaper Manufacture
    • Fruit Concentrate
    • Paint Manufacture
    • Textile Industry
    • Pumping Fine Powders
    • Liquid PVC
    • Plating Chemical
    • Processing
    • Lacquering
    • Tannery
    • Hides
    • Sugar Juice Clarification
  • TERADA (JAPAN)
    TERADA (JAPAN)
    CO SERIES CAST STAINLESS STEEL SELF PRIMING PUMP

    FEATURES
    • 25mm to 150mm discharge port diameter
    • Materials in SUS304, SUS316
    • Available for 4P, 2P motors
    • Models can be in gland pack seal or mechanical seal

    USES 
    • Industrial Uses
    • Power Plant
    • Antipollution Plant
    • Sewage Disposal Plant
  • ISO Standard End Suction Pumps
    ISO Standard End Suction Pumps
    Efficient and reliable general purpose water transfer in industry, building services and irrigation.
  • Vertical Multistage Pumps
    Vertical Multistage Pumps
    Suitable for water and highly aggressive watery liquids – Domestic water boosters, sprinkling, fire fighting, water treatment plants, seawater pumping, chemical processing, food processing and irrigation.
  • Automatic Water Pressure Systems
    Automatic Water Pressure Systems
    Designed for automatic pressure boosting in domestic applications, gardens, dairies and stock watering.
  • Transfer Pumps
    Transfer Pumps
    Designed for the general purpose transfer of clean, abrasive free water for cooling systems, air conditioning, water purification, metering systems, cleaning, light industrial and agricultural applications.
  • Submersible Pumps
    Submersible Pumps
    For all general water supply from 100mm or larger boreholes– Domestic, industrial, stock watering, fire fighting, irrigation pressure boosting.
  • Submersible Pumps and Line Shaft Turbine Pumps
    Submersible Pumps and Line Shaft Turbine Pumps
    Designed for raising underground water supplies for domestic, industrial, community, irrigation, stock watering, mining and line shaft turbine applications.
  • Everflow Submersible Pumps and Line Shaft Turbine Pumps
    Everflow Submersible Pumps and Line Shaft Turbine Pumps
    Heavy duty, high efficiency deep well turbine and submersible pumps, designed for submersible applications in bores from 150mm. Available in a wide range of material and drive options.
  • Helical Rotor Pumps
    Helical Rotor Pumps
    General water transfer and borehole applications particularly suited to low volume high pressure work.
  • Horizontal Split Case Pumps
    Horizontal Split Case Pumps
    Designed for high volume water transfer in municipal supply, irrigation, mining, fire fighting, dewatering and industrial applications.
  • Windmills and Windmill Pumps
    Windmills and Windmill Pumps
    Designed and made in Australia for 140 years, Southern Cross Windmills provide reliable, environmentally friendly pumping performance from boreholes and other sources.
  • Variable Frequency Drives
    Variable Frequency Drives
    Southern Cross IQ variable frequency drives and EQ pipe mounted variable frequency drives provide intelligent control of any three phase pump motor.
  • Semi Open Impeller Submersible and Lineshaft Turbine Pumps
    Semi Open Impeller Submersible and Lineshaft Turbine Pumps
    Superior to enclosed impellers for handling fines and stringy material like iron bacteria.
  • Submersible Electric Motors
    Submersible Electric Motors
    Oil filled, encapsulated and rewindable submersible electric motors for driving submersible pumps. Available in sizes from 4 to 14 inches and ranging from 0.37kW (0.5Hp) to more than 225kW (300Hp).
  • SX Vacuum Pumps
    SX Vacuum Pumps
    Ultra tough PUMPING units for coal, sand, sludge, mine slurry, mud and rocks, drill cuttings, almost anything!
  • Self Priming Pumps
    Self Priming Pumps
    The Southern Cross ST/XT/SU heavy heavy duty self-priming solids handling trash pumps feature a durable, easy to maintain design which make them ideal for transferring dirty water.
  • Slurry and Solids Pumps
    Slurry and Solids Pumps
    Reliable slurry pumping and dewatering solutions for heavy duty applications in mining, industry, construction, oil and gas.
  • Model BXM6-15 High Pressure Reciprocating
    Model BXM6-15 High Pressure Reciprocating
    Extra-large oil reservoir provides superior lubrication, while insuring more effective cooling and less maintenance. The crankshaft is field-reversible for application flexibility. Easy access to suction and discharge valves means no need to remove pump from system for repair. Factory tested for continuous service with only simple, routine maintenance.

    KEY FEATURES
    • Flows to 8 GPM
    • Pressure ratings up to 1,500 PSI
    • Easy access to valves for servicing
    • Whisper quiet operation
    • Extra-large oil sump for superior lubrication
    • Clear rear cover for easy oil level inspection
  • Model CX Series High Pressure Reciprocating
    Model CX Series High Pressure Reciprocating
    Rugged design for continuous operation. Three suction ports for installation versatility. Smooth solid ceramic cylinder liners allow continuous operation at maximum pressure and flow. Large concentric suction and discharge valves allow complete filling of cylinders. Solid cast iron power end with constant lubrication of all working parts. Fluid end available in high-strength cast iron, aluminum-bronze, or 316 stainless steel.

    KEY FEATURES
    • Flows to 20 GPM
    • Pressure ratings to 1,500 PSI
    • Constant lubrication of all power end parts
    • Spring loaded chevron style packing
  • Model CXP Series High Pressure Reciprocating Plunger
    Model CXP Series High Pressure Reciprocating Plunger
    These pumps offer seven interchangeable plunger and seal packages, allowing complete hydraulic coverage. Optimum flow and pressure is easily converted, even in the field by changing the plunger and seal kit. Cylinder body of high-strength ductile iron or aluminum-bronze for salt-water applications.

    KEY FEATURES
    • Flows to 30 GPM
    • Pressure ratings to 3,500 PSI
    • Continuous splash lubrication provided either direction of rotation
    • Offerings of seven interchangeable plunger and seal packages
    • Easily serviced in field without removal of pump
  • Model CPM Series High Pressure Reciprocating Plunger
    Model CPM Series High Pressure Reciprocating Plunger
    Superior equipment technology allows the versatility to machine the pump end from a selection of standard or optional materials. Removable cover section for easy service and is available with hydraulic drive adaption.

    KEY FEATURES
    • Flows to 18 GPM
    • Pressure ratings up to 4,000 PSI
    • Crankshaft rotates in either direction
    • Continuous splash lubrication provided
    • Cast Iron crankcase serves as oil reservoir
  • Model C Series High Pressure Reciprocating Piston
    Model C Series High Pressure Reciprocating Piston
    Heavy-duty piston pump with high-strength fluid end and spring-loaded flat valves for economical high-pressure pumping of large volumes of fluid. Crankshaft can be rotated in either direction making installation easier.

    KEY FEATURES
    • Flows to 40 GPM
    • Pressure ratings to 2,500 PSI
    • High-strength fluid end with spring-loaded flat valves for consistent high pressure pumping
    • Easily serviced in field without removal of pump
  • Model D Series High Pressure Reciprocating
    Model D Series High Pressure Reciprocating
    Slow operating speed reduces wear and prolongs pump life. The fluid end is available in ductile iron or aluminum bronze with flat valves, making routine maintenance easy without removing the pump from the system. All the valve and piston assemblies are serviceable through convenient front and top openings.

    KEY FEATURES
    • Flows to 65 GPM
    • Pressure ratings up to 2,000 PSI
    • Internal gear reductions
    • Continuous splash lubrication provided either direction of rotation
  • High Pressure Reciprocating Plunger
    High Pressure Reciprocating Plunger
    Myers largest high volume/pressure series offers interchangeable plungers, seals, and fluid ends to provide various flow/pressure ratings. Also available in hydraulic drive configuration

    KEY FEATURES
    • Flows to 120 GPM
    • Pressure ratings up to 5,500
    • Internal gear reductions of 3.95:1
    • Super hard, non-scoring plungers
    • Suction and discharge located for easy service
    • Offerings of seven interchangeable plunger and seal packages
  • High Pressure Reciprocating
    High Pressure Reciprocating
    Gearcase of rugged cast iron protects the gears and serves as an oil reservoir for continuous splash lubrication. Pinion and gear are helical cut and machined from high-strength alloy steel and can rotate in either direction. Valves are abrasion resistant for dependable service in the harshest environments.

    KEY FEATURES
    • Flows to 110 GPM
    • Pressure ratings up to 3,000
    • Easily serviced in field without removal of pump
    • Abrasion resistant valve assemblies
    • Internal gear reductions of 3.95 to 1
  • Model HPL Series NEW High Pressure Reciprocating
    Model HPL Series NEW High Pressure Reciprocating
    The HPL Series brings you the latest in sewer jet pump technology from your time-tested partner, Myers. The HPL keeps your truck running with industry-leading serviceability, a breakthrough in jetting. New cartridge valves, an open cradle for packing and plunger maintenance, and an external lube filter minimize maintenance time, keeping your equipment on the job making you money.

    KEY FEATURES
    • True 120 GPM at 3,000 PSI
    • True Continuous Duty
    • Quiet Operation
  • Model V2 Series 2HP Grinder Pumps
    Model V2 Series 2HP Grinder Pumps
    The Myers® V2 Series is the newly innovative 2 hp submersible grinder pump designed specifically for use in today's complex wastewater environment. It features an advanced cutting technology and semi-open impeller design to effectively macerate typical domestic sewage solids into a fine slurry.

    KEY FEATURES
    Cable entry system
    -- Provides double seal protection. Cable jacket sealed by compression fitting. Individual wires sealed by compression grommet. Power cord can be replaced without disturbing motor. Optional quick disconnect available

    Grinder assembly
    -- Rotating cutter and stationary cutter are replaceable without dismantling pump. Constructed of 440 SST hardened to 57-60 Rockwell
  • Model CT Series High Pressure Centrifugal Pump Series
    Model CT Series High Pressure Centrifugal Pump Series
    CT Series centrifugal pumps are designed to meet your toughest pumping requirements. Rugged cast iron construction can be coupled with either a corrosion resistant composite, or a lead-free brass impeller. Versatile design features allow the CT pumps to be installed with either a vertical or horizontal discharge. The CT Series is ideal for irrigation, air conditioning, cooling tower and booster applications.

    KEY FEATURES
    • 1/2 to 2-1/2 HP Models
    • High Head Capabilities to 140 Feet
    • Flow Capacities to 95 GPM
    • Double-Ball Bearing Motor 
        -- Continuous Duty Rated
        -- Single Phase (115/230 Volt) 
        -- Three Phase (208/230/460 Volt)
    • Choice of Impellers:
         -- Composite Impeller Rated to 140°F
         -- Brass Impeller Rated to 212°F
    • Maximum Working Pressure of 125 PSI
    • Choice of Complete Unit or Pump End
  • Centri-Thrift Centrifugal Pump Series
    Centri-Thrift Centrifugal Pump Series
    Centri-Thrift centrifugal pumps are designed for continuous service under demanding conditions. Centi-Thrift pumps have earned a reputation for reliability in booster service, air conditioning, cooling tower, refrigeration, water circulation, liquid transfer, sprinkling, laundry, irrigation, building service, spraying and general industrial applications.

    KEY FEATURES
    • 1/2 to 2-1/2 HP Models
    • 2 to 7-1/2 HP Models
    • High Head Capabilities to 140 Feet
    • Flow Capacities to 240 GPM
    • Available with 1-1/4", 1-1/2" and 2" Discharge Sizes
    • Can be Close-Coupled or Belt-Driven
    • Choice of Complete Unit or Pump End Assembly
  • 3/4-5 HP Quick Prime Centrifugal
    3/4-5 HP Quick Prime Centrifugal
    Quick Prime self-priming pumps are designed to supply large quantities of water for long periods. QP’s are ideal for lawn sprinkler systems, car washes and other high volume cleaning and maintenance applications.

    KEY FEATURES
    • Rugged Cast Iron Case and Motor Bracket
    • Single and Three-Phase NEMA Motors
    • Available in 3/4 to 5 HP
    • Reinforced Composite or Lead-Free Brass Impellers
    • Maximum Head Capabilities of 178 feet
    • Maximum Pressure of 77 PSI
    • Maximum Flow Capacities to 140 GPM
    • Choice of Complete Unit or Pump End Assembly
  • Two Stage Centrifugal
    Two Stage Centrifugal
    High performance 2C two-stage centrifugal pumps are designed  to provide years of trouble-free service. The pump end quickly  mounts to a NEMA 56C motor. Myers stream-flo design and dynamically balanced impellers produce quiet, vibration-free performance at all pressures. 2C pumps will prime up to 15 feet of total suction lift.

    KEY FEATURES
    • Heavy-Duty, All Metal Construction
    • Rugged Cast Iron Case, Motor Bracket and Internal Housings
    • Stainless Steel Pump Shaft
    • Available in 1, 1-1/2 and 2 HP
    • Lead-Free Silicon Bronze Impellers
    • Maximum Head Capabilities of 175 feet
    • Maximum Flow Capacities to 47 GPM
    • Maximum Temperatures of 160°F
    • Long Life, Carbon-Ceramic Mechanical Shaft Seal Lapped and Polished Stainless Steel Construction
    • Choice of Complete Unit or Pump End Assembly
  • Two Stage Centrifugal
    Two Stage Centrifugal
    I2C and I2CI two-stage centrifugal pumps are designed for high performance, continuous duty and long life. I2C Series pumps have been installed in booster, irrigation, water circulation, fluid transfer, boiler feed, car wash, water reclamation, water supply, golf course sprinkling and other general industrial, commercial and agricultural applications requiring the pumping of clear or non-corrosive liquids.

    KEY FEATURES
    • Models Available with Rugged Cast Iron Impellers or Lead-Free Brass Impellers
    • 60 Hz, Three-Phase, 230/460 Volt Motors are Standard
    • Available in 5 to 20 HP
    • Maximum Head Capabilities over 400 feet
    • Maximum Flow Capacities to 140 GPM
    • I2C and I2CI Have Threaded 2” Suction and 1-1/2” Discharge
    • Maximum Temperatures of 220°F
  • 2HP Centrifugal Grinder Vortex Impeller
    2HP Centrifugal Grinder Vortex Impeller
    The Myers WG20/WGX20 Series are rugged 2 horsepower submersible centrifugal grinder pumps designed for residential, light commercial or industrial applications. It is especially suited for use in pressure sewer applications or in systems with long discharge runs or high static heads. The WG20 Series features a patented cutter mechanism and recessed impeller design to efficiently grind typical domestic sewage solids into a fine slurry.

    KEY FEATURES
    • Pressure to 105 feet of head and flows of 70 GPM. Standard or high flow designs.
    • Recessed impeller provides steep non-overloading operating curve.
    • Oil-filled motor for max. heat dissipation and constant bearing lubrication.
    • Recessed impeller reduces radial bearing loads, increases bearing life.
    • High torque capacitor starts single phase motor for assured starting under heavy load.
    • Seal moisture sensor warns of leak condition, prevents costly motor damage.
  • 5HP Centrifugal Grinder Vortex Impeller
    5HP Centrifugal Grinder Vortex Impeller
    The Myers WG50/WG50X are rugged 5 horsepower submersible centrifugal grinder pumps designed for residential, light commercial, industrial or municipal applications. They are especially designed for grinder pump applications requiring higher flows at low to moderate heads. The WG50 features a heavy-duty cutter mechanism and recessed impeller design to efficiently grind typical sewage into a fine slurry.

    KEY FEATURES
    • Capacities To 185 gpm (693 lpm)
    • Pressure To 92 ft. of head (28.1 m)
    • Liquids Handling
    -- domestic raw sewage
    • Intermittent Liquid Temp. up to 140ºF (up to 60ºC)
    • Winding Insulation Temp. (Class F) 311ºF (155ºC)
    • Motor Electrical Data (Single phase motors are capacitor start type. Myers control panels or capacitor kits are recommended for proper operation and warranty.)
    -- 3450 RPM: 3–5 HP, 1 ph, 230 volt 3 ph, 200/230/460 volt 60 Hz
  • 15 HP Centrifugal Grinder Vortex Impeller
    15 HP Centrifugal Grinder Vortex Impeller
    The Myers high head 15 HP submersible centrifugal grinder pumps are designed for municipal, commercial or industrial applications. These pumps are especially suited for use in pressure sewer applications or in systems with long discharge runs or high static heads. The pumps feature a heavy-duty cutter mechanism and recessed impeller designed to efficiently grind typical sewage solids into a fine slurry.

    KEY FEATURES
    • Capacities To 150 gpm (568 lpm)
    • Pressure To 257 ft. of head (78 m)
    • Liquids Handling-- Domestic raw sewage
    • Intermittent Liquid Temp. up to 140°F (up to 60°C)
    • Winding Insulation Temp. (Class H) 356°F (180°C)
    • Motor Electrical Data-- 3450 RPM: 7½, 10 and 15 HP 200/230/460/575 volts 3 phase, 60 Hz
    • Std. Third Party Approvals CSA
    • Optional Approvals FM Class 1, Groups C & D (WGX750HH only)
  • 3" Solids Handling
    3" Solids Handling
    The heavy-duty Myers 3MW series sewage pumps are designed for use in residential raw sewage and light commercial applications. 3MW pumps are available in single and double seal configuration. The enclosed two-vane impeller provides high efficiency pumping and easily handles trashy solids normally found in sewage applications. This series is offered with vertical discharge and easily adapts to a quick-disconnect slide rail system.

    KEY FEATURES
    • Capacities To 330 gpm (20.82 lps)
    • Heads To 92 ft. (28.0 m)
    • Solids Handling-- 1750 2½ in. (63.5 mm)-- 3450 2 in. (50.6 mm)
    • Liquids Handling-- Raw sewage, effluent, rain water
    • Intermittent Liquid Temp. up to 140°F (up to 60°C)
    • Winding Insulation Temp. (Class B) 260°F (130°C)
  • 3" Non-Clog
    3" Non-Clog
    Myers 3V and 3VX (explosion-proof) submersible wastewater pumps pass a full 2 1/2" spherical solid and are the ideal choice whe selecting a pump for your next application. Myers rounded port 2-vane enclosed impeller prevents solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 3V series modified constant veloctiy volute case provides smooth operation over an extended portion of the performance curve for extended seal and bearing life. For use in municipal lift stations, treatment plants, and industrial waste applications.

    KEY FEATURES
    • Capacities to 400 gpm (25.24 lpm)
    • Pressures 48 ft. of head (14.6 m)
    • Solids Handling Capacity 2 1/2 in. (63.5 mm)
    • Liquids Handling-- raw unscreened sewage, effluent, storm water
    • Intermittent Liquid Temp up to 140°F (60°C)
    • Winding INsulation Temp.(Class F) 311°F (155°C)
    • Motor Electrical Data-- 1750 RPM: 1-5 HP, 230V, 1Ø, 60 Hz, 1-5 HP, 200/230/460/575V, 3Ø, 60Hz
    • Std. Third Party Approvals CSA
  • 3" Solids Handling Horizontal and Vertical Discharge
    3" Solids Handling Horizontal and Vertical Discharge
    The 3WHV and V3WHV series solids handling pumps are designed primarily for commercial applications such as schools and churches, industrial plants, shopping centers, apartments and condominiums, marinas, interstate rest stops, sewage collection systems, and much more. This pump can be installed on legs (vertical discharge) or with a quick-disconnect slide rail system. Its ability to handle 2½-inch spherical solids makes it ideal for most light to medium commercial installations.

    KEY FEATURES
    • Capacities to 400 gpm (25.24 lps)
    • Pressures to 48 ft. of head ( 14.6 m)
    • Solids Handling (dia.) 2 1/2 in (63.5 mm)
    • Liquids Handling -- raw unscreened sewage, effluent, storm water
    • Intermittent Liquid Temp up to 140°F (60°C)
    • Motor Electrical Data ( single phase motors are capacitor start type. Myers control panels or capacitor kits are required for proper operation and warranty.) -- 1750 RPM: 1-5 HP, 230V, 1Ø, 60 Hz, 1-5 HP, 200/230/460/575V, 3Ø, 60 Hz
    • Std. Third Party Approvals CSA
  • 4" Solids Handling
    4" Solids Handling
    The 4RC and 4RCX (hazardous location) submersible wastewater pumps are the right choice when difficult to pump fibrous or stringy solids are to be expected. The 4RC/4RCX series provides smooth, vibration-free operation when operating at heads higher than peak efficiency. The pump is for use in municipal lift stations, treatment plants and industrial waste water applications.

    KEY FEATURES
    • Capacities To 1250 gpm (78.8 lps)
    • Pressure To  265 ft. of head (80.8 m)
    • Solids Handling 3 in. (76 mm)
    • Liquids Handling-- raw unscreened sewage, fibrous wastewater, efluent, storm water
    • Intermittent Liquid Temp. up to 140°F (up to 60°C)
    • Winding Insulation Temp. 356°F ( 180°C)
    • Motor Electrical Data 

    -- 1150 RPM: 3–15 HP, 200/230/460/575V, 3 phase, 60 Hz 
    -- 1750 RPM: 10–40 HP, 200/230/460/575V, 3 phase, 60 Hz 3450 rpm 20–60 HP, 230/460/575 volts, 3 phase, 60 Hz
    • Std. Third Party Approvals FM, Class 1, Div. 1, Groups C & D (4RCX only)
    • Acceptable pH Range 6 – 9Specific Gravity .9 – 1.1
  • 4" High Head Non-Clog
    4" High Head Non-Clog
    The Myers 4VL submersible non-clog sewage pumps are designed especially for high flow applications such as: municipal lift stations, treatment plants, transfer stations and dewatering. A quick removal type rail system is available to simplify installation and maintenance. The 4VL’s ability to handle solids up to 3 inches in diameter makes it ideal for most high flow wastewater applications.

    KEY FEATURES
    • Capacities To 2100 gpm  (8000 lpm)
    • Pressure To 275 ft. of head  (84 m)
    • Solids Handling 3 in. (76 mm)
    • Liquids Handling-- raw unscreened sewage, drain water, effluent
    • Intermittent Liquid Temp. up to140ºF  (up to 60ºC)
    • Winding Insulation Temp. (Class H)  356°F  (180°C)
    • Available Motors-- 1750 RPM: 50, 60, 75, 100, 125 HP 460 & 575 volts 3 phase, 60 Hz
    • Std. Third Party Approvals CSA
    • Optional Approvals FM Class 1, Groups C & D (4VLX only)
    • Acceptable pH Range 6 - 9
  • 12" Submersible Non-Clog
    12" Submersible Non-Clog
    The Myers 12VL submersible non-clog sewage pumps are designed especially for high flow, medium head applications such as: Large municipal lift stations, treatment plants, transfer stations and dewatering. A quick removal type rail system is available to simplify installation and maintenenance. The 12VL's high pumping efficiencies, ability to handle solids up to 5 1/4 inches in diameter and 2 available motor speeds make it ideal for most high flow watewater applications.

    KEY FEATURES
    • Capacities To 7750 gpm (29331 lmp)
    • Pressure To 72 ft. of head (21.9 m)
    • Solids Handling 5 1/2 in. (133.3 mm)
    • Liquids Handling-- raw, unscreened sewage, drain water, effluent
    • Intermittent Liquid Temp. up to 140°F (up to 60°C)
    • Winding Insulation Temp. (Class H) 356°F (180°C)
  • 4" Solids Handling Enclosed Impeller
    4" Solids Handling Enclosed Impeller
    The 4VCDP submersible dry pit wastewater pumps are a heavy-duty 4" non-clog series capable of passing a full 3 3/16" spherical solid. Myers rounded port, 2 vane, enclosed impellers prevent solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 4VCDP series modified constant velocity volute case provides smooth operation over an extended portion of the performance curve for long seal and bearing life. For use in munipical and industrial waste applications.

    KEY FEATURES
    • Capacities To 1800 gpm (113.4 l/s)
    • Pressure To  165 ft. of head (50.3 m)
    • Solids Handling 3 3/16 in. (80 mm)
    • Liquids Handling-- raw unscreened sewage, effluent, storm water
    • Intermittent Liquid Temp. up to 140°F (up to 60°C)
    • Winding Insulation Temp. (Class H) 365°F (180°C)
    • Std. Third Party Approvals CSA(pending) 
    • Optional Approvals FM Class 1, Groups C & D (pending- 4VCXDP only)
    • Acceptable pH Range 6 – 9
    • Specific Gravity .9 – 1.1
    • Viscosity 28 – 35 SSU
  • 4" High Head Non-Clog Enclosed Impeller
    4" High Head Non-Clog Enclosed Impeller
    The Myers 4VLDP submersible dry pit non-clog sewage pumps are designed especially for high flow applications such as: municipal stations, treament plants, transfer stations and dewatering. The ability to handle solids up to 3 inches in diameter makes it ideal for most high flow wastewater applications.

    KEY FEATURES
    • Capacities To  2100 gpm (8000 lmp)
    • Pressure To 275 ft. of head ( 84 m)
    • Solids Handling 3 in. (76 mm)
    • Liquids Handling-- raw unscreened sewage, drain water, effluent
    • Intermittent Liquid Temp. up to 140°F (up to 60°C)
    • Winding Insulation Temp. (Class H) 365°F (180°C)
    • Specific Gravity .9 – 1.1
    • Viscosity 28 – 35 SSU
    • Discharge, Horizontal 4 in. (101.8 mm)
  • 6" Non-Clog Enclosed Impeller
    6" Non-Clog Enclosed Impeller
    The 6VCPD submersible dry pit wastewater pumps are a heavy-duty 6" non-clog series capable of passing a full 3 3/16" spherical solid. Myers rounded port, 2-vane, enclosed impellers prevent solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 6VCDP series modified constant veolcity volute case provides smooth operation over an extended portion of the performance curve for long seal and bearing life. For use in municipal and industial waste applications.

    KEY FEATURES
    • Capacities To 2400 gpm (151.2 lps)
    • Pressure To 146 ft. of head (44.5 m)
    • Solids Handling 3 3/16" (80 mm)
    • Liquids Handling-- raw unscreened sewage, effluent, storm water
    • Intermittent Liquid Temp. up to 140°F (up to 60°C)
    • Winding Insulation Temp. (Class H) 365°F (180°C)
  • 3 HP Submersible Solids Handling
    3 HP Submersible Solids Handling
    Designed specifically for use in agricultural lagoon and sewage pit applications. The AG Series is the right choice to handle string trash, fibrous wastes, slurries and other difficult to pump solids without plugging the impeller. The AG pumps have been field proven to provide reliable operation and dependable performance.

    KEY FEATURES
    • Capacities To 500 gpm (1892 lpm)
    • Pressure To 50 ft. of head (15.24 m)
    • Solids Handling 3 in. (76 mm)
  • 3" Vortex
    3" Vortex
    The Myers 3WHR Vortex pumps provide low maintenance and low cost. All Myers Vortex pump models have multi-vane, recessed impeller design which pass 3” solids per the “10 State Standards” while keeping the impeller out of direct contact with the pumping medium.

    KEY FEATURES
    • 3” discharge Vortex impeller pump
    • Handles solids up to 3” in diameter per the “10 State Standards”
    • Flows up to 300GPM (25.2lps)
    • Heads up to 37ft  (14.6m)
    • 1750RPM
  • 4" Vortex
    4" Vortex
    The 4WHR series solids handling pumps are designed primarily for commercial applications such as schools and churches, industrial plants, shopping centers, apartments and condominiums, marinas, interstate rest stops, sewage collection systems, campgrounds, motels, restaurants, office and commercial buildings, state and federal parks, hospitals and nursing homes, dewatering, trailer parks and treatment plants. This pump can be installed with a quick-disconnect slide rail system. Its ability to handle 3-inch spherical solids makes it ideal for most light to medium commercial installations.

    KEY FEATURES
    • 4” discharge Vortex impeller pump
    • Handles solids up to 3” in diameter per the “10 State Standards”
    • Flows up to 600GPM  (45.5lps)
    • Heads up to 57ft  (17.9m)
    • 1750RPM
  • Dual Seal Self-Primer
    Dual Seal Self-Primer
    Myers self-primers are available with V-belt drive in order to save space and money. When space is expensive or just not available, the V-belt configuration allows the motor to be mounted above the pump or to the side of the pump.The Myers direct drive option with flexible coupling reduces shaft stress so you get longer pump life. It is easy to maintain and keeps running for years.External adjustment allows you to easily maintain original operating efficiency and peak performance. By simply turning the external cap screws you easily adjust the clearance between the impeller and wear plate.You can make the external adjustment without disturbing the piping system. You don’t have to disassemble the pump and piping.KEY FEATURESMSPD3: Dual Seal Primer2-1/2" Solids HandlingStandard Seals: Carbon CeramicOptional Seals: Silicon Carbide or Tungsten CarbideHeavy-Duty Ball Bearing DesignOil or Grease Lubricated Bearings
  • Dual Seal Self-Primer
    Dual Seal Self-Primer
    Myers self-primers are available with V-belt drive in order to save space and money. When space is expensive or just not available, the V-belt configuration allows the motor to be mounted above the pump or to the side of the pump.The Myers direct drive option with flexible coupling reduces shaft stress so you get longer pump life. It is easy to maintain and keeps running for years.External adjustment allows you to easily maintain original operating efficiency and peak performance. By simply turning the external cap screws you easily adjust the clearance between the impeller and wear plate.You can make the external adjustment without disturbing the piping system. You don’t have to disassemble the pump and piping.

    KEY FEATURES
    • MSPD3: Dual Seal Primer
    • 2-1/2" Solids Handling
    • Standard Seals: Carbon Ceramic
    • Optional Seals: Silicon Carbide or Tungsten Carbide
    • Heavy-Duty Ball Bearing Design
    • Oil or Grease Lubricated Bearings
  • Single/Dual Seal Self-Primer
    Single/Dual Seal Self-Primer
    The MSP4/MSPD4 has an external adjustment which saves downtime and doubles the life of the impeller/wear plate. It also has a removable rotating assembly and serviceable flap valve without draining the pump.

    Myers self-primers are available with V-belt drive in order to save space and money. When space is expensive or justnot available, the V-belt configuration allows the motor to be mounted above the pump or to the side of the pump.

    The Myers direct drive option with flexible coupling reduces shaft stress so you get longer pump life. It is easy to maintain and keeps running for years.

    External adjustment allows you to easily maintain original operating efficiency and peak performance. By simply turning the external cap screws you easily adjust the clearance between the impeller and wear plate.

    You can make the external adjustment without disturbing the piping system. You don’t have to disassemble the pump and piping.
  • Control Systems
    Control Systems
    Engineered to Maximize Pump System Operating EfficienciesMyers specializes in complete engineered packaged pump and control systems. All control panels are custom engineered to the customer's specifications using the highest quality components. Whether you need a simple float controlled lift station or multiple pump control with variable frequency drives, count on Myers to provide excpetional value at a competitive price.

    KEY FEATURES
    • Single Source Responsibility
    • Integrated pump/control system for high system operating efficiencies
    • Guarantees proper stem operation
    • Provides maximum value

    Services
    • Expedient quatations
    • Complete submittal packages
    • Timely deliveries

    Types of Control Systems
    • Variable Speed Drive Applications
    • SCADA Software
    • Programmable Logic Control Systems
    • Process Control and Instrumentation
    • Built to UL Standards
  • Efficient System Solutions
    Efficient System Solutions
    Satisfying Pumping Needs at the Lowest Cost Over the Life of the System
    Myers optimizes system efficiencies with complete engineering services, providing cost-effective solutions and immediate cost savings when planning a pump station. Myers collection system design service provides a comprehensive analysis and design of the complete network, ensuring the system operates at peak efficiencies under various running conditions. Myers software programs provide the engineering tools to properly design the ideal station, including the number of pumps, type of control and lift system.

    Myers Quality Engineered Designes Provides Economic and Environmental Value Over the Life of the System
    • High efficiencies
    • Non-clogging
    • Reliable operating
    • Low maintenance
    • Low system operating costs
  • Pump Vault System
    Pump Vault System
    Our engineered system includes the pump filter vault, the high-head effluent submersible pump, and float controls. We will design a system to fit your needs and the special requirements of your project.

    KEY FEATURES
    • Installs quickly in new or existing concrete or fiberglass tanks
    • Easy access design allows filter cartridge removal without pulling the pump or vault; simplifies filter inspection and maintenance
    • Removes all suspended solids greater than 1/8"
    • Accommodates simplex or duplex configuration
    • Float stem bracket allows easy removal and adjustment of float assembly
    • Sturdy, molded polyethylene and corrosion-proof construction ensure long life
  • Two-Stage Centrifugal Pump
    Two-Stage Centrifugal Pump
    Myers I2C and I2CI Two-Stage Centrifugal Pumps are designed and built for rugged continuous duty service.  This general servvice pump can be found in a wide variety of applications.

    Available in two versions:
    --   I2C with Brass Impeller
    --   I2CI with Cast Iron Impeller

    KEY FEATURES
    • Head up to 400 feet
    • Up to 140 GPM flow rates
    • Rugged cast iron construction

    WARRANTY
    Whichever comes first:
    12 months from date of original installation, or
    18 months from date of manufacture
  • Check Valve Series
    Check Valve Series
    1-1/4" - 3" Pipes, Thermoplastic & Cast Iron Options

    KEY FEATURES
    CV-150: Thermoplastic check valve with reversible connection sleeves for adapting to 1-1/4" or 1-1/2" pipes

    CV-200 & CV-300: Compression-type 2" & 3" check valves

    CV-200P & CV-300P: Cast iron 2" and 3" check valves with NPT threaded connections

  • SFA System
    SFA System
    Flexible piping system with slip-fit discharge connection provides ease of installation and removal for all 2 HP grinders. Pumps include a stainless steel stand.

    Flexible piping system with slip-fit discharge connection for all 2 HP grinders provides ease of installation and removal. Pumps include a stainless steel stand. Available with Polyethylene or Fiberglass basin.
  • SHA System
    SHA System
    Package includes your choice of 2HP submersible grinder pump, union disconnect discharge piping system, control panel, wide angle control float, narrow angle high level alarm float and fiberglass basin available at various depths.

    Factory assembled discharge piping with single union ball valve disconnect eliminates installation errors and reduces installation time dramatically. Available with Fiberglass or Polyethylene basin.
  • Control Panel
    Control Panel
    The Float Plus is an innovative approach to today’s pump control system requirements with standard features unmatched by most competitors. Through the use of a standard subdoor and raised back panel, the Float Plus Series offers a revolutionary design for housing common control panel features such as circuit breakers, start components, contactors and a terminal strip. While others ask you for more dollars to cover options, the Float Plus Series provides many of the most requested items as standard equipment. Some of these standard features includes lockable latches, a flashing red alarm light with an electronic horn, the innovative touch to silence pad, and a control circuit board, all in a NEMA 4X enclosure. In addition to unsurpassed standard features, Float Plus offers an exclusive control circuit board. Conveniently located on the subdoor, the float indication lights allow the user to see the status of each float and flashes should a float fail.
  • Control Panel
    Control Panel
    nnovative solid state control panel with hand contact sensor to control the alarm functions and integrated alarm light and buzzer. The control panel includes on-board pumping system diagnostics with pump run time counter and pump cycle counter. 
  • Rail System
    Rail System
    Package includes your choice of a 2 HP submersible grinder pump, SRA rail system, control panel, three floats and a polyethylene basin available at various depths.

    Liftout rail system provides ease of installation and removal for the centrifugal grinder pumps. The SRA System uses a cast iron discharge elbow with integrated ball check valve. Also available with spark-proof rails for hazardous locations. Available with Polyethylene or Fiberglass basin.
  • Basin Mixer
    Basin Mixer
    The Myers Submersible Basin Mixer keeps the contents of your basin mixed to help prevent solids from floating, grease buildup, or help keep your basin from going septic.

    KEY FEATURES
    • Break up solids that commonly float at the top of the basin
    • Prevent grease buildup in the lift station
    • Prevent the lift station from going septic during periods of low activity
    • A variable speed motor control panel is available
  • Simplex Electrical Control Panels
    Simplex Electrical Control Panels
    Myers has re-engineered the control panel line for improved durability, reliability and economy. CAD flexibility enhances our response time to help us better meet your control panel requirements.

    KEY FEATURES
    Quality Electrical Componenets Assure Reliable, Automatic Pump Operation
    • IEC horsepower-rated contactors (single phase) and motor starters (three phase) rated at over 1 million cycles.
    • Three phase starters with ambient-compensated quick-trip overloads for maximum motor protection.
    • Designed for use with three standard mercury float switches, off-on-alarm. (not included with panel, please order seperately)

    Corrosion Resistant for Long Life
    • Outdoor panels of weathertight NEMA 4X fiberglass with aluminum back panel.
    • Indoor panels of enamel-coated galvanized steel.
  • Three-Phase Simplex/Duplex Control Panels
    Three-Phase Simplex/Duplex Control Panels
    Myers has re-engineered the control panel line for improved durability, reliability and economoy. CAD flexibility enhances our response time to help us better meet your control panel requirements.

    KEY FEATURES
    Quality Electrical Components Assure Reliable, Automic Pump Operation
    • IEC horsepower-rated motor starters with 3-pole ambient compensated bi-metal overload relay rated at over 1 million cycles.
    • Designed for use with standard mercury float switches. Uses three for simplex (off-on-alarm), four for duplex (off-on-override-alarm).
    • Solid state alternator relay to equalize pump wear (duplex only).
    • Override relay starts second pump if first one fails for any reason (on duplex panels only).
    • Full inner door (except CGL).
  • SRA Liftout
    SRA Liftout
    SRA Liftout
  • TERADA
    TERADA
    TERADA
  • TERADA
    TERADA
    TERADA
  • TERADA
    TERADA
    TERADA
  • TERADA
    TERADA
    TERADA
  • THREE PHASE PUMPS
    THREE PHASE PUMPS
    GSZ Series
  • THREE PHASE PUMPS
    THREE PHASE PUMPS
    KRS Series
  • THREE PHASE PUMPS
    THREE PHASE PUMPS
    LHW Series
  • THREE PHASE PUMPS
    THREE PHASE PUMPS
    KTV Series
  • THREE PHASE PUMPS
    THREE PHASE PUMPS
    LH Series
  • THREE PHASE PUMPS
    THREE PHASE PUMPS
    GPN Series
  • THREE PHASE PUMPS
    THREE PHASE PUMPS
    KTD Series
  • THREE PHASE PORTABLES
    THREE PHASE PORTABLES
    KTZ Series
  • THREE PHASE PORTABLES
    THREE PHASE PORTABLES
    LH/LHW Series
  • DAVEY
    DAVEY
    Water Pumps & Pressure Systems
  • DAVEY
    DAVEY
    Pumping System
  • DAVEY
    DAVEY
    Pool Filters
  • DAVEY
    DAVEY
    Rain Water Harvesting Pumps & Controllers
  • DAVEY
    DAVEY
    Pool Pumps
  • DAVEY
    DAVEY
    SPA – Pumps
  • DAVEY
    DAVEY
    Fire Pumps – Engine Driven
  • DAVEY
    DAVEY
    Jet Pumps
  • LT Series
    LT Series
    12 GPM (45LPM)
    48 Feet (15 Meters)
  • CD SERIES
    CD SERIES
    160 GPM (606 LPM)
    100 Feet (30 Meters)
  • RC SERIES
    RC SERIES
    400 GPM (1514 LPM)
    72 Feet (23 Meters)
  • CL 150 SERIES
    CL 150 SERIES
    300 GPM (1136 LPM)
    150 Feet (46 Meters)
  • XL/XT SERIES
    XL/XT SERIES
    400 GPM (1514 LPM)
    136 Feet (41 Meters)
  • XJ/JB SERIES
    XJ/JB SERIES
    1100 GPM (4164 LPM)
    300 Feet (91 Meters)